T10/501/W5W - CREE LED 7.5W

T10/501/W5W - CREE LED 7.5W

This T10/501/W5W Cree LED bulb has an output wattage of 7.5W. CREE LEDs are the brightest LED bulbs currently available on the market and really are a true innovation within the automotive industry.

This particular CREE LED model is designed to fit in sockets T10/501/W5W and comes fitted with a CREE LED chip along with a projector lens for that additional LED brightness at a much greater distance than ever before! This bulb also has LEDs fitted to the sides of each bulb to ensure maximum light output withn your light cluster/housing.

This is a plug and play replacement for your current T10/501/W5W bulb and the LED colour is PURE XENON WHITE. T10/501/W5W fitment bulbs can be used in various automotive applications, such as side lights, interior lights and even number plate lights. Don’t forget you will receive additional discounts for purchasing more than one CREE LED bulb across the whole range. 

Below are the key features of this T10/501/W5W CREE LED bulb: -

Colour Options – Pure Xenon White.

OEM Fitment – designed to fit just as factory bulbs, no cutting or splicing any wiring looms.

Response Time - quicker ON/OFF response compared to traditional bulbs and LEDs.

Power & Efficiency – LED power of 7.5W along with energy efficiency savings, to be used with 12V applications.

Lifespan – 50,000 hours, thanks to the high quality USA imported CREE chips.

Multi Fitment – can be used for Side Lights, Number Plate, Interior Lights, basically anything with a T10/501/W5W socket!

CANBUS Friendly* – designed to work with majority of CANBUS related vehicles.

All our CREE LED bulbs have been manufactured to the highest standards using high quality CREE components imported from the USA.

This product comes with a 1-year warranty.

*This bulb is designed and manufactured to work with CANBUS related vehicles, but we must stress that some vehicles, no matter how CANBUS friendly the bulbs are, they will always throw up errors on the dash or cause the bulb to flicker. If this is the case with your vehicle then a resistor kit is the only solution for you to enjoy these LEDs. Please see our ‘Accessories’ section for our simple and effective CREE LED resistor kit solutions.

Adrien S on 01/01/2017

Very good product, I highly recommend it!

Graham Statham on 11/09/2016

Fitted to a Suzuki DL650 V-Strom the bulbs just fit in behind the lens. These bulbs are considerably longer than the standard wedge bulbs they replaced. They are much brighter than standard and matched the colour of the H4 lamp upgrades fitted at the same time. Maybe Horizon LEDs could list dimensions

Mike on 27/12/2015

As others have said, the build quality, brightness, and colour of these are amazing compared to other bulbs. Sadly the metal part of the bulb is fractions of a millimetre wider than the hole they need to go in for the side-lights on an EP3 Civic. They seem to violate the T10 spec (bulb must be no wider than 10.29mm) as these are around 11.5-12mm at their widest point.

Molvi on 24/11/2014

I bought these as recommended by one of my friends. I was taken aback at the results. The colour is fabulous, as is the brightness. Keeping the sidelights on constantly during the day, it is a head turner. Highly rexommended. Money well spent

Brett on 22/03/2014

Bought the new Cree LEDs to replace my existing side lamps.These are one of the best quality Iv seem on the market and give outstanding bright light with a great look to any car. I would recommend these LEDs as a great mod to your existing side lights. The service and delivery was outstanding and a pleasure to do business and will be shopping again. Regards Brett

Showing 1 to 5 of 5 (1 Pages)

Write a review